Add Evolo Gateway

A gateway is installed on a device (such as a Raspberry Pi or a PC) and facilitates communication between the building and Evolo toppsystem.

1. Set up the Gateway

Select the desired operating system:

• Set up Gateway on Balena OS

• Set Up Gateway on Windows

• Set Up Gateway on Linux

• Set Up the Gateway on the Wago PLS

2. Connect the Gateway

1. Connect the device to the Internet.

2. Open a web browser and go to:

   • http://localhost:8080 (if the gateway is running locally on your PC)

   • http://evolo-gateway.local:8080 (Balena OS)

   • http://enhetens-ip:8080 (if .local doesn’t work)

3. Copy the key displayed on the screen.

3. Add the Gateway in Evolo

1. In Evolo, select the relevant build and go to Configuration → Gateway

2. Click Add Gateway and paste the key

3. (Optional) Enter the IP address, hardware, and location.

4. Confirm by clicking Save.
   

4. Verify the connection

Wait a few seconds to see the connection status in the “Status” column.

If “Connected” is displayed, you can proceed to Add a device